Aug 7, 2020 16:38
3 yrs ago
16 viewers *
Dutch term
etagepers
Dutch to English
Tech/Engineering
Manufacturing
plastics
I'm working on a book about the history of a Dutch/Danish manufacturer of melamine tableware. They use injection moulding, but in the 1960s and 70s, they used something called an 'etagepers'. Google image search suggests that it's called a multilayer press in English. Can anyone confirm that this would be used to make melamine plates and bowls?
Proposed translations
(English)
2 +1 | Multi-daylight press | James Duncan |
3 | multilayer press | Alexander Schleber (X) |
References
refs | Michael Beijer |
Proposed translations
+1
11 mins
Selected
Multi-daylight press
This comes from Groot Polytechnisch Woordenboek with application stated as 'plastics'.
I cannot personally vouch for this being correct. It
I cannot personally vouch for this being correct. It
4 KudoZ points awarded for this answer.
15 hrs
multilayer press
Even though multi-daylight press is listed in the Kluwer dictionary, I find the term technically not sensible. If, instead, you look for "multilayer press" on Google, you immediately get a larfge number of sites, where this term is used producing polatics laminations and PCB products..
Reference comments
21 hrs
Reference:
refs
see this glossary of hydraulic press terms:
"Daylight - The vertical clearance from the top of the bolster to the underside of the ram in its maximum up position. This term sometimes is confused with the mechanical press term "shut height". Shut height is the clearance over the bed with the ram full down. "Daylight" describes the maximum vertical capacity of the press."
https://www.greenerd.com/hydraulic-press-productivity-guide/...
and:
https://www.mpsmachines.co.uk/product-category/daylight-pres...
--------------------------------------------------
Note added at 21 hrs (2020-08-08 14:26:44 GMT)
--------------------------------------------------
"Figure 3: Single-daylight hydraulic plate press
Another categorization of hydraulic plate presses is possible by the number of existing daylights. A daylight is the space between two press plates. A press with two pressplates has one opening where workpieces can be placed and is called a single-daylight press (Figure 3). If a press is equipped with a multiple number of pressplates it allows multiple workpieces to be processed during one presscycle. These presses are called multi-daylight presses (Figure 4). Today presses with more than 40 daylights are common in the industry.
Figure 4: Multi-daylight hydraulic plate press"
(https://www.protence.com/app/download/17982201/The Press Pro... )
---------------
‘Single-daylight press or multi-daylight press.’ ("The press process in the wood based panel industry" @ https://www.slideshare.net/TobiasSchreck/the-press-process-i... )
etc.
--------------------------------------------------
Note added at 21 hrs (2020-08-08 14:31:17 GMT)
--------------------------------------------------
see also IATE:
NL: etagepers
Definition: plaatpers die één of meer individueel gevormde platen perst
Definition reference:
Uitvoeringsbesluit (EU) 2015/2119 van de Commissie van 20 november 2015 tot vaststelling van BBT-conclusies (beste beschikbare technieken) op grond van Richtlijn 2010/75/EU van het Europees Parlement en de Raad, voor de productie van platen en panelen op basis van hout, CELEX:32015D2119/NL
Language level note:
Er zijn twee typen: de eenetagepers (met maar één ingang, waardoor maar één plaat tegelijk kan worden vervaardigd) en de meeretagepers (die meerdere ingangen heeft en dus meerdere platen tegelijk kan vervaardigen).
Bron: Polders, C. et al. (2011). Beste Beschikbare Technieken (BBT) voor de houtverwerkende nijverheid. Gent: Academia Press, blz. 210, http://emis.vito.be/sites/emis.vito.be/files/pages/migrated/... [3.3.2016]
=
ENG: multi-opening press
Reference: Best Available Techniques (BAT) Reference Document for the Production of Wood–based Panels, European Commission, Joint Research Centre. 2014 http://eippcb.jrc.ec.europa.eu/reference/BREF/WBP_online.pdf [22.10.2015]
Definition: panel press that presses one or more individually formed panels
Definition reference: Best Available Techniques (BAT) Reference Document for the Production of Wood–based Panels, European Commission, Joint Research Centre. 2014 http://eippcb.jrc.ec.europa.eu/reference/BREF/WBP_online.pdf [22.10.2015]
Language level note: The continuous press [ IATE:3565571 ] was introduced in the 1970s and has almost completely replaced the single-opening daylight press [ IATE:1427006 ] and the multi-opening press.
ENG: multi daylight platen press
Reference: Multi Daylight Platen Press, Duemas Technology Ltd. http://www.duemas.com/d_platen_multi.html [30.10.2015]
Definition: panel press that presses one or more individually formed panels
Definition reference: Best Available Techniques (BAT) Reference Document for the Production of Wood–based Panels, European Commission, Joint Research Centre. 2014 http://eippcb.jrc.ec.europa.eu/reference/BREF/WBP_online.pdf [22.10.2015]
Language level note: The continuous press [ IATE:3565571 ] was introduced in the 1970s and has almost completely replaced the single-opening daylight press [ IATE:1427006 ] and the multi-opening press.
(https://iate.europa.eu/search/standard/result/1596896922934/... )
"Daylight - The vertical clearance from the top of the bolster to the underside of the ram in its maximum up position. This term sometimes is confused with the mechanical press term "shut height". Shut height is the clearance over the bed with the ram full down. "Daylight" describes the maximum vertical capacity of the press."
https://www.greenerd.com/hydraulic-press-productivity-guide/...
and:
https://www.mpsmachines.co.uk/product-category/daylight-pres...
--------------------------------------------------
Note added at 21 hrs (2020-08-08 14:26:44 GMT)
--------------------------------------------------
"Figure 3: Single-daylight hydraulic plate press
Another categorization of hydraulic plate presses is possible by the number of existing daylights. A daylight is the space between two press plates. A press with two pressplates has one opening where workpieces can be placed and is called a single-daylight press (Figure 3). If a press is equipped with a multiple number of pressplates it allows multiple workpieces to be processed during one presscycle. These presses are called multi-daylight presses (Figure 4). Today presses with more than 40 daylights are common in the industry.
Figure 4: Multi-daylight hydraulic plate press"
(https://www.protence.com/app/download/17982201/The Press Pro... )
---------------
‘Single-daylight press or multi-daylight press.’ ("The press process in the wood based panel industry" @ https://www.slideshare.net/TobiasSchreck/the-press-process-i... )
etc.
--------------------------------------------------
Note added at 21 hrs (2020-08-08 14:31:17 GMT)
--------------------------------------------------
see also IATE:
NL: etagepers
Definition: plaatpers die één of meer individueel gevormde platen perst
Definition reference:
Uitvoeringsbesluit (EU) 2015/2119 van de Commissie van 20 november 2015 tot vaststelling van BBT-conclusies (beste beschikbare technieken) op grond van Richtlijn 2010/75/EU van het Europees Parlement en de Raad, voor de productie van platen en panelen op basis van hout, CELEX:32015D2119/NL
Language level note:
Er zijn twee typen: de eenetagepers (met maar één ingang, waardoor maar één plaat tegelijk kan worden vervaardigd) en de meeretagepers (die meerdere ingangen heeft en dus meerdere platen tegelijk kan vervaardigen).
Bron: Polders, C. et al. (2011). Beste Beschikbare Technieken (BBT) voor de houtverwerkende nijverheid. Gent: Academia Press, blz. 210, http://emis.vito.be/sites/emis.vito.be/files/pages/migrated/... [3.3.2016]
=
ENG: multi-opening press
Reference: Best Available Techniques (BAT) Reference Document for the Production of Wood–based Panels, European Commission, Joint Research Centre. 2014 http://eippcb.jrc.ec.europa.eu/reference/BREF/WBP_online.pdf [22.10.2015]
Definition: panel press that presses one or more individually formed panels
Definition reference: Best Available Techniques (BAT) Reference Document for the Production of Wood–based Panels, European Commission, Joint Research Centre. 2014 http://eippcb.jrc.ec.europa.eu/reference/BREF/WBP_online.pdf [22.10.2015]
Language level note: The continuous press [ IATE:3565571 ] was introduced in the 1970s and has almost completely replaced the single-opening daylight press [ IATE:1427006 ] and the multi-opening press.
ENG: multi daylight platen press
Reference: Multi Daylight Platen Press, Duemas Technology Ltd. http://www.duemas.com/d_platen_multi.html [30.10.2015]
Definition: panel press that presses one or more individually formed panels
Definition reference: Best Available Techniques (BAT) Reference Document for the Production of Wood–based Panels, European Commission, Joint Research Centre. 2014 http://eippcb.jrc.ec.europa.eu/reference/BREF/WBP_online.pdf [22.10.2015]
Language level note: The continuous press [ IATE:3565571 ] was introduced in the 1970s and has almost completely replaced the single-opening daylight press [ IATE:1427006 ] and the multi-opening press.
(https://iate.europa.eu/search/standard/result/1596896922934/... )
Something went wrong...