Feb 15, 2007 14:44
17 yrs ago
Dutch term
insteekas
Dutch to English
Tech/Engineering
Mechanics / Mech Engineering
(funnel) worm gear pumps
Product information sheet:
Voordelen en kenmerken
- Met vrij aseinde of kort gekoppeld
- Snelle **insteekas** tussen rotor en aandrijving
- Geïntegreerde trechter met toevoerschroef
- Toevoerschroef aangepast aan het te verpompen product
After a lot of searching on the internet, I finally came up with 'plug-in shaft'. Can anyone confirm this or advise what the correct term should be. Many thanks in advance.
Voordelen en kenmerken
- Met vrij aseinde of kort gekoppeld
- Snelle **insteekas** tussen rotor en aandrijving
- Geïntegreerde trechter met toevoerschroef
- Toevoerschroef aangepast aan het te verpompen product
After a lot of searching on the internet, I finally came up with 'plug-in shaft'. Can anyone confirm this or advise what the correct term should be. Many thanks in advance.
Proposed translations
(English)
4 | plug-in shaft | Marijke Singer |
2 +2 | half-shaft; axle shaft | Henk Peelen |
4 | insertion shaft or axle | Jack den Haan |
3 | comment | Ken Cox |
Proposed translations
20 hrs
Selected
plug-in shaft
See the following websites:
http://www.rfmacdonald.com/pumps/seepex2.html
"service-friendly with a plug-in shaft connection installed between rotating unit and drive, disassembly / assembly can be performed easily without special tools"
http://moxleyelectronics.com/main/product-information/sumito...
"Optional plug-in shaft and bolt-on feet afford multiple mounting configurations"
http://www.rfmacdonald.com/pumps/seepex2.html
"service-friendly with a plug-in shaft connection installed between rotating unit and drive, disassembly / assembly can be performed easily without special tools"
http://moxleyelectronics.com/main/product-information/sumito...
"Optional plug-in shaft and bolt-on feet afford multiple mounting configurations"
4 KudoZ points awarded for this answer.
Comment: "Thanks,Marijke. Your references are also very useful for my translation in general. Thanks to you Henk, Jack, Ken as well."
+2
57 mins
half-shaft; axle shaft
Lijkt me een steekas
Kluwer Groot Polytechnisch Woordenboek:
steekas = axle shaft. half-shaft
http://www.mijnwoordenboek.nl/thema/MG/NL/EN/A/1
aandrijfas
NL: aandrijfas
EN: differential shaft
NL: steekas
EN: axle shaft
NL: differential shaft
EN: wheel drive shaft
Kluwer Groot Polytechnisch Woordenboek:
steekas = axle shaft. half-shaft
http://www.mijnwoordenboek.nl/thema/MG/NL/EN/A/1
aandrijfas
NL: aandrijfas
EN: differential shaft
NL: steekas
EN: axle shaft
NL: differential shaft
EN: wheel drive shaft
2 hrs
insertion shaft or axle
Just google 'insertion shaft' and/or 'insertion axle'.
3 hrs
comment
There aren't many Dutch hits, but the term appears to be a literal translation of the German Einsteckwelle, for which there are quite a few hits and several apparently legitimate translations. Generally speaking, it appears to be a shaft designed for insertion into some other (hollow) shaft. As far as I can tell, this can mean either a simple, relatively short 'native' (fixed) output shaft or (perhaps more often) an accessory shaft or shaft module with its own bushing and mounting flange that plugs into a hollow shaft to provide a male output shaft on a unit built with a hollow (female) output shaft (see the Nord documentation (www.nord.com) and www.bonfiglioli.com/pdf/300ind/799833000/man300ind.pdf for examples of the latter).
Something went wrong...