https://www.osha.gov/SLTC/etools/electric_power/illustrated_...




https://www.iic.org/en/projects/project-disclosure/11624-02/...
The project consists of the installation of 35 Vestas V110-2.0 wind turbines with nominal capacity of 2.0 MW each, for a total installed capacity of 70 MW. The wind farm will be built under an operating lease agreement with the UTE. The project has a significant positive environmental impact given that it will generate electricity from a renewable resource and will result in a reduction in greenhouse gas emissions. The project includes the construction of a measuring and cutting station, a control center, a transformer substation, and a 150 kV transmission line of 6 km to connect the wind farm to the existing Salto-Arapey line. Also, 20 km of internal roads will be built, 7 m wide, to enable access to each of the wind turbines, to the substation, and to the control and measurement stations. The wind turbines will be connected to the substation with medium-voltage (31.5 kV) underground cables.


How are CTs connected in the 33/11 KV substation? - Quora
https://www.quora.com/How-are-CTs-connected-in-the-33-11-KV.... -
31 ago. 2018 - They are used in a substation for metering and protection purpose. CT primary winding is connected in series with line while the secondary ... (this is where I got the idea of "metering").


http://biblioteca.olade.org/opac-tmpl/Documentos/hm000176.pd...
see pages 15 onwards about "Salto Grande" in English. I doubt it will help much.


https://www.saltogrande.org/transmision.php



What I would say is a "connecting and metering substation".

In general this circuit breaker is located at the medium voltage system inside a substation, where also the electricity meter for the settlement purposes is installed. This usually has its own voltage and current transformers.

-------------------------------------------------------
The main components for the grid connection of the WT are the transformer and the substation with the circuit breaker and the electricity meter inside it. Because of the high losses in low voltage lines, each Figure 1.1: Yearly installed capacity of wind energy in Europe and wold-wide of the turbines has its own transformer from the voltage level of the WT (400 or 690 V) to the medium voltage line. The transformer are located directly beside the WT to avoid long low-voltage cables. Only for small WTGS it is possible to connect them directly to the low voltage line of the grid without a transformer or, in a wind farm of small WT, to connect some of the small WT to one transformer. For large wind farms a separate substation for transformation from the medium voltage system to the high voltage system is necessary.

https://ec.europa.eu/energy/sites/ener/files/documents/2001_...