Glossary entry (derived from question below)
German term or phrase:
Keramikhonung
English translation:
ceramic honing
Added to glossary by
barbarameyer
Nov 10, 2015 17:02
8 yrs ago
German term
Keramikhonung
German to English
Tech/Engineering
Automotive / Cars & Trucks
Truck/bus engines
Context:
"Die Kolben laufen direkt im Kurbelgehäuse. Durch Keramikhonung der Zylinderlaufflächen werden optimale Ergebnisse bezüglich Verschleißbeständigkeit und Ölverbrauch erreicht."
* Sentence or paragraph where the term occurs: See above
* Document type: Workshop manual
* Target audience: Motor mechanics
* Country and dialect (source): German
* Country and dialect (target): British English
"Die Kolben laufen direkt im Kurbelgehäuse. Durch Keramikhonung der Zylinderlaufflächen werden optimale Ergebnisse bezüglich Verschleißbeständigkeit und Ölverbrauch erreicht."
* Sentence or paragraph where the term occurs: See above
* Document type: Workshop manual
* Target audience: Motor mechanics
* Country and dialect (source): German
* Country and dialect (target): British English
Proposed translations
(English)
3 +3 | ceramic honing | barbarameyer |
Change log
Nov 24, 2015 04:43: barbarameyer Created KOG entry
Proposed translations
+3
36 mins
Selected
ceramic honing
https://www.scribd.com/doc/160891770/MAN-D0836-CR-en
The new crankcase is cast in one piece together with the cylinder block from cast iron alloy. 6 cooling water channels drilled between the cylinders guarantee excellent heat dissipation and a uniform temperature distribution at the surface of the cylinders. High rigidity and lower noise emissions are achieved by providing appropriate ribs on the new aluminium intermediate plate. The crankcase ventilation is designed as a closed system, i.e. the blow-by is fed back to the engine combustion via a valve with integral oil mist separator. The pistons run directly in the crankcase where optimum conditions with regard to resistance to wear and oil consumption are achieved due to the ceramic honing of the cylinder surfaces.
https://www.scribd.com/doc/160891770/MAN-D0836-CR-en
--------------------------------------------------
Note added at 1 hr (2015-11-10 18:23:38 GMT)
--------------------------------------------------
Honing services use fine-grit abrasives to provide a very high finish to metals when super finishes or tight tolerances are required....Honing services may also use flexible hones or hand hones, and various types of honing sticks and tools to refine the finish of internal bores and external surfaces...With metal tubes, cylinders, and other hollow circular objects, either the inner diameter or the outer diameter is honed...Ceramic honing is used with ceramic tubes and rods, and to produce sharp surfaces.
http://www.globalspec.com/learnmore/contract_manufacturing_f...
The new crankcase is cast in one piece together with the cylinder block from cast iron alloy. 6 cooling water channels drilled between the cylinders guarantee excellent heat dissipation and a uniform temperature distribution at the surface of the cylinders. High rigidity and lower noise emissions are achieved by providing appropriate ribs on the new aluminium intermediate plate. The crankcase ventilation is designed as a closed system, i.e. the blow-by is fed back to the engine combustion via a valve with integral oil mist separator. The pistons run directly in the crankcase where optimum conditions with regard to resistance to wear and oil consumption are achieved due to the ceramic honing of the cylinder surfaces.
https://www.scribd.com/doc/160891770/MAN-D0836-CR-en
--------------------------------------------------
Note added at 1 hr (2015-11-10 18:23:38 GMT)
--------------------------------------------------
Honing services use fine-grit abrasives to provide a very high finish to metals when super finishes or tight tolerances are required....Honing services may also use flexible hones or hand hones, and various types of honing sticks and tools to refine the finish of internal bores and external surfaces...With metal tubes, cylinders, and other hollow circular objects, either the inner diameter or the outer diameter is honed...Ceramic honing is used with ceramic tubes and rods, and to produce sharp surfaces.
http://www.globalspec.com/learnmore/contract_manufacturing_f...
Peer comment(s):
agree |
Tibor Pataki
13 mins
|
Thank you, t_pataki
|
|
agree |
philgoddard
: I found this, but I wasn't sure because it's a translation from German. // OK!
30 mins
|
Please see the addendum to my answer. // Thanks :-)
|
|
agree |
Richard Stephen
13 hrs
|
Good to get your confirmation, Richard Stephen
|
4 KudoZ points awarded for this answer.
Comment: "Selected automatically based on peer agreement."
Discussion