Glossary entry (derived from question below)
Danish term or phrase:
mærketryk
English translation:
rated pressure
Added to glossary by
stephen mewes
Apr 1, 2003 05:35
21 yrs ago
Danish term
mærketryk
Danish to English
Tech/Engineering
maalvaerdiomformere skal kunne taale ensidig belastning med det statiske mærketryk paa plus- og minussidan.
Proposed translations
(English)
4 | rated pressure | Christina Clark |
Proposed translations
2 hrs
Selected
rated pressure
Some context:
"TEST PRESSURES SHOULD MEET THE FOLLOWING CRITERIA:
Be no less than 1.25 times the working pressure at the highest point along the test section
Exceed no pipe, fitting, or thrust-restraint design pressures
Be at least 2 hours in duration
Vary by no more than +/- 5 psi (34.5 kPa) for the duration of the test
Exceed no more than twice the rated pressure of the valves or hydrants when the pressure boundary of the test section includes closed metal seated valves or hydrants
valves should not be operated in either direction at differential pressure exceeding the rated pressure
hydrants in a test section should only be tested with the main valve of the hydrant closed
Not exceed the rated pressure of the valves when the pressure boundary of the test section includes closed, resilient seated gate valves, or rubber-seated butterfly valves."
http://www.acipco.com/international/engineering-data/ggfft.c...
"1800 watt induction motor giving 120 bar max permissable pressure and a rated pressure of 95 bar." http://www.argos.co.uk/webapp/commerce/command/ArgCmdReferra...
See following links:
"TEST PRESSURES SHOULD MEET THE FOLLOWING CRITERIA:
Be no less than 1.25 times the working pressure at the highest point along the test section
Exceed no pipe, fitting, or thrust-restraint design pressures
Be at least 2 hours in duration
Vary by no more than +/- 5 psi (34.5 kPa) for the duration of the test
Exceed no more than twice the rated pressure of the valves or hydrants when the pressure boundary of the test section includes closed metal seated valves or hydrants
valves should not be operated in either direction at differential pressure exceeding the rated pressure
hydrants in a test section should only be tested with the main valve of the hydrant closed
Not exceed the rated pressure of the valves when the pressure boundary of the test section includes closed, resilient seated gate valves, or rubber-seated butterfly valves."
http://www.acipco.com/international/engineering-data/ggfft.c...
"1800 watt induction motor giving 120 bar max permissable pressure and a rated pressure of 95 bar." http://www.argos.co.uk/webapp/commerce/command/ArgCmdReferra...
See following links:
4 KudoZ points awarded for this answer.
Something went wrong...