Aug 29, 2018 11:23
5 yrs ago
English term
shot
English to Russian
Tech/Engineering
Engineering (general)
breast pumps
Добрый день, что здесь обозначает shot? Русь о молокоотсосах, документ по рискам.
Design will be changed to reduce the length of overmold (santoprene) of tubing adapter assembly, on the second shot by ~5.6mm. There is no design change to first shot (p/n 8107158).
The volume of second shot (over-mold) will be reduced by ~10%.
Спасибо
Design will be changed to reduce the length of overmold (santoprene) of tubing adapter assembly, on the second shot by ~5.6mm. There is no design change to first shot (p/n 8107158).
The volume of second shot (over-mold) will be reduced by ~10%.
Спасибо
Proposed translations
2 hrs
Selected
впрыск
http://babyplast.ru/assets/files/babyplast_pm_11_2016.pdf
Впрыск первого
компонента
http://www.polyone.com/files/resources/Overmold_Design_Guide...
This is usually not an
issue with two-shot molding because the
first shot is automatically supported on
the “B-half” of the tool.
Впрыск первого
компонента
http://www.polyone.com/files/resources/Overmold_Design_Guide...
This is usually not an
issue with two-shot molding because the
first shot is automatically supported on
the “B-half” of the tool.
4 KudoZ points awarded for this answer.
Something went wrong...