| Pages in topic: [1 2] > | Error 80005 occured when open a .doc file with TagEditor Thread poster: Yourcells
|
|---|
Yourcells
Local time: 03:03
English to Chinese
Hi,
When I use TagEditor 7.5 to open a word file with extention .doc, it shows an error message "(80005): This Microsoft Word document cannot be opened because ithas tracking changes turned on".
The version of my SDL Trados and TagEditor is 7.5.0.756.
I have checked the revision and tracking changes through the .doc file and accepted all changes. I also use word macro to check whether there are any review object left in the doc and the count of the revision is 0.
Please... See more Hi,
When I use TagEditor 7.5 to open a word file with extention .doc, it shows an error message "(80005): This Microsoft Word document cannot be opened because ithas tracking changes turned on".
The version of my SDL Trados and TagEditor is 7.5.0.756.
I have checked the revision and tracking changes through the .doc file and accepted all changes. I also use word macro to check whether there are any review object left in the doc and the count of the revision is 0.
Please give some advice on this problem? Thank you very much.
[修改时间: 2008-01-25 01:13] ▲ Collapse
| | | | Suzanne Blangsted (X) 
Local time: 12:03
Danish to English
+ ...
| Tracking changes | Jan 25, 2008 |
This is from the English version:
Open your word document, click on "Tool" in your task bar. unclick the track changes there. Sometimes you need to click on the icon twice to see how it looks when it is turned off.
Then you can see the difference and make sure that it is turned off.
Then save the document again.
You should then not have any problems opening it in TagEditor.
Suz
| | | | Yourcells
Local time: 03:03
English to Chinese
TOPIC STARTER | Another error occured | Jan 25, 2008 |
Thank you BLANGSTED.
I have tried your method but another error message shows "(80005): This Microsoft Word document cannot be opened due to tracked changes that have not yet been accepted or rejected".
Since I have checked the file, there is no changes without accepted or rejected. Would you or someone else give some further help?
Thank you in advance.
| | | | Jerzy Czopik
Germany
Local time: 21:03
Member (2003)
Polish to German
+ ...
| Happens sometimes | Jan 25, 2008 |
Please save the Word document under a different name.
Should this not help, save as rtf, close, reopen and save as doc again.
HTH
Jerzy
| | |
|
|
|
Yourcells wrote:
I have tried your method but another error message shows "(80005): This Microsoft Word document cannot be opened due to tracked changes that have not yet been accepted or rejected".
Since I have checked the file, there is no changes without accepted or rejected. Would you or someone else give some further help?
Locate Word_1_0_0_0.xml file (standard location is c:\program files\sdl international\t2006\tt), open it in Unicode-enabled text editor and go to NonAcceptedOrRejectedChangesHandling section. Default setting is Default, which means StopConversion. Change Default to Ignore for this section, save the XML file (hope you did the backup first), re-open TagEditor and open Word file again.
| | | | Yourcells
Local time: 03:03
English to Chinese
TOPIC STARTER | It does works | Jan 28, 2008 |
Hi Wojciech Froelich,
Thank you very much. Your soluction does work!
| | | | | Use "TradosFilterSettings" | Mar 12, 2008 |
An easier way to do this is is to run TradosFilterSettings.exe, select "Non accepted or rejected changes" under "Word 2000-2003" and check "Process documents with non accepted or rejected changes".
| | | | KJIDTP
Local time: 13:03
English
| Having the same issue in Trados 2007 with SP2 | Mar 18, 2008 |
I'm having the same issue and neither of the above suggested fixes are working for me. The TradosFilterSettings.exe is giving an error when I open it, it allows me to continue but when I click "Save" to make the changes it gives the error again and does not make the change. When I make the change manually in the Word_1_0_0_0.xml file it gets rid of the first error and now is replaced by: "(80005): Error while reading endnotes or footnotes." Error. Has anyone encountered this problem or know of a... See more I'm having the same issue and neither of the above suggested fixes are working for me. The TradosFilterSettings.exe is giving an error when I open it, it allows me to continue but when I click "Save" to make the changes it gives the error again and does not make the change. When I make the change manually in the Word_1_0_0_0.xml file it gets rid of the first error and now is replaced by: "(80005): Error while reading endnotes or footnotes." Error. Has anyone encountered this problem or know of a work around?
Thanks! ▲ Collapse
| | |
|
|
|
| Changing the settings in the XML file | May 17, 2008 |
Wojciech Froelich wrote:
Locate Word_1_0_0_0.xml file (standard location is c:\program files\sdl international\t2006\tt), open it in Unicode-enabled text editor and go to NonAcceptedOrRejectedChangesHandling section. Default setting is Default, which means StopConversion. Change Default to Ignore for this section, save the XML file (hope you did the backup first), re-open TagEditor and open Word file again.
Thank you. This worked where every other approach (and a few hours of frustrated testing) failed.
| | | | dgonneau
France
Local time: 21:03
English to French
+ ...
use of TradosFilterSettings.exe fixed the problem
| | | |
Wojciech Froelich wrote:
Locate Word_1_0_0_0.xml file (standard location is c:\program files\sdl international\t2006\tt), open it in Unicode-enabled text editor and go to NonAcceptedOrRejectedChangesHandling section. Default setting is Default, which means StopConversion. Change Default to Ignore for this section, save the XML file (hope you did the backup first), re-open TagEditor and open Word file again.
Same problem here. I used the EXE, but I did not have a clue that this could be done. Thanks a million Wojciech!
| | | | | TradosFilterSettings.exe - worked for me | Sep 21, 2008 |
Paul Godfrey - thanks a million for your tip. It has just solved my problem - when all other methods failed.
| | |
|
|
|
Neil Claridge
United States
Local time: 15:03
Spanish to English
+ ...
| Same problem... | Oct 2, 2008 |
Hi,
I have opened the "Word_1_0_0_0" file but can't find any "NonAcceptedOrRejectedChangesHandling" section. It simply isn't there.
I have also tried opening the "TradosFilterSettings", yet "Non accepted or rejected changes" does not appear anywhere.
This is a nightmare! And of course, it's costing me both time and money.
Does anyone have another way of getting TagEditor to process Word docs regardless of changes?
Thanks a lot in... See more Hi,
I have opened the "Word_1_0_0_0" file but can't find any "NonAcceptedOrRejectedChangesHandling" section. It simply isn't there.
I have also tried opening the "TradosFilterSettings", yet "Non accepted or rejected changes" does not appear anywhere.
This is a nightmare! And of course, it's costing me both time and money.
Does anyone have another way of getting TagEditor to process Word docs regardless of changes?
Thanks a lot in advance,
Neil ▲ Collapse
| | | | | Thank you, it helped also to me :) | Nov 12, 2008 |
Paul Godfrey wrote:
An easier way to do this is is to run TradosFilterSettings.exe, select "Non accepted or rejected changes" under "Word 2000-2003" and check "Process documents with non accepted or rejected changes".
| | | |
Neil Claridge wrote:
Hi,
I have opened the "Word_1_0_0_0" file but can't find any "NonAcceptedOrRejectedChangesHandling" section. It simply isn't there.
I have also tried opening the "TradosFilterSettings", yet "Non accepted or rejected changes" does not appear anywhere.
This is a nightmare! And of course, it's costing me both time and money.
Does anyone have another way of getting TagEditor to process Word docs regardless of changes?
Thanks a lot in advance,
Neil
Hi Neil,
it all depends on your version of Trados. What should work for you is the DOC -> RTF -> DOC workaround. It's never let me down...
| | | | | Pages in topic: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Error 80005 occured when open a .doc file with TagEditor | CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
| | Trados Business Manager Lite | Create customer quotes and invoices from within Trados Studio
Trados Business Manager Lite helps to simplify and speed up some of the daily tasks, such as invoicing and reporting, associated with running your freelance translation business.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
