Çark payı
English translation: Blade allowance
| GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
|---|---|---|---|---|---|---|
|
| 10:26 Dec 10, 2007 |
| Turkish to English translations [PRO] Tech/Engineering - Metallurgy / Casting / Alüminyum Doğrama | |||||
|---|---|---|---|---|---|
|
| ||||
|  Selected response from: chevirmen Türkiye Local time: 11:49 | ||||
Grading comment
| |||||
| Summary of answers provided | ||||
|---|---|---|---|---|
| 4 +2 | Blade allowance |
| ||
| 5 | saw cut width/kerf |
| ||
| 4 | cut wheel (saw wheel) margin |
|
| Discussion entries: 1 | |
|---|---|
Answers
4 hrs confidence: 
saw cut width/kerf Explanation: The teeth protrude to the left and right, so that the saw cut (kerf) is wider ... Kerf: Width of the saw cut. On most saws the kerf is wider than the saw ... Kerf: Width of the saw cut. On most saws the kerf is wider than the saw blade because the teeth are flared out sideways (set). This allows the blade to move through the cut easily without getting stuck (binding). However, some saws are made so that the teeth have no set on one side. This is done so that the saw can lie flat on a surface and cut along the surface without scratching it. These are referred to as flush cutting saws. The term kerf is often used to mean the width of the saw blade. However it is the width of the cut so it is the width of the blade plus any wobble created during cutting plus any material pulled out of the sides of the cut. This distinction can be extremely important. If you try to use a blade that is too thin you can get excessive wobble and actually get a wider kerf. Reference: http://en.wikipedia.org/wiki/Saw#Saw_terminology Reference: http://www.dewalt.com/us/products/accessory_category_detail.... |
| |
| Login to enter a peer comment (or grade) | ||
3 hrs confidence: 
peer agreement (net): +2
peer agreement (net): +2Blade allowance Explanation: www.stevennicholson.com/duckchaser/DuckChaserInstructions.pdf -------------------------------------------------- Note added at 10 hrs (2007-12-10 20:59:45 GMT) -------------------------------------------------- veya kerf allowance. Reference: http://www.idahoforests.org/img/pdf/lessons/cuts.pdf Reference: http://home.earthlink.net/~mcjackson/TT_Track.htm |
| ||||||||||
Grading comment
| |||||||||||
1 day 2 hrs confidence:
Login or register (free and only takes a few minutes) to participate in this question. You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy. KudoZ™ translation helpThe KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.
See also: Search millions of term translations | |||||||||||
