GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
13:51 Jan 19, 2011 |
Swedish to English translations [PRO] Tech/Engineering - Metallurgy / Casting / Welding | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Sven Petersson Sweden Local time: 14:20 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
5 +1 | arc strikes |
| ||
2 | ignition spots/marks |
|
Discussion entries: 4 | |
---|---|
ignition spots/marks Explanation: On the basis of the following: Ljusbågen skall alltid tändas nere i fogen för att inte tändsår skall bildas. Om tändsår ändå uppstår måste dessa repareras noggrant genom slipning och polering eller i värsta fall genom svetslagning. http://www.avestawelding.com/4919.epibrw 4.5 Welding defects as well as welding spatter and ignition spots on the base material are to be removed by careful grinding. http://www.freeweb.gr/bulletins/nb/lawctd603.pdf ... welded joints, and surfaces around welds, must be free of discontinuities such as cracks, poor penetration, end craters, ignition marks or overrun welds. Ignition marks, weld spatter and slag residues must be carefully removed. http://www.okg.se/upload/Dokumentation/TBY/TBY eng.pdf Good arc ignition and reigniting characteristics No ignition scratch marks in the base material (less grinding repair) http://www.kemppi.com/kemppi/files/fitweld_tacking_productiv... |
| ||
Notes to answerer
| |||
Login to enter a peer comment (or grade) |
arc strikes Explanation: :o) Reference: http://www.avestawelding.com/4622.epibrw Reference: http://www.avestawelding.com/4623.epibrw |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.