20:15 Mar 8, 2020 |
Russian to English translations [PRO] Tech/Engineering - Energy / Power Generation | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: IrinaN United States Local time: 00:54 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
3 | to use [to convert] heat drop |
| ||
2 | produce a heat drop/heat drop takes place |
|
produce a heat drop/heat drop takes place Explanation: Velocity compound "Curtis". Curtis combined the de Laval and Parsons turbine by using a set of fixed nozzles on the first stage or stator and then a rank of fixed and rotating blade rows, as in the Parsons or de Laval, typically up to ten compared with up to a hundred stages of a Parsons design. The overall efficiency of a Curtis design is less than that of either the Parsons or de Laval designs, but it can be satisfactorily operated through a much wider range of speeds, including successful operation at low speeds and at lower pressures, which made it ideal for use in ships' powerplant. In a Curtis arrangement, the entire heat drop in the steam takes place in the initial nozzle row and both the subsequent moving blade rows and stationary blade rows merely change the direction of the steam. Use of a small section of a Curtis arrangement, typically one nozzle section and two or three rows of moving blades, is usually termed a Curtis 'Wheel' and in this form, the Curtis found widespread use at sea as a 'governing stage' on many reaction and impulse turbines and turbine sets. This practice is still commonplace today in marine steam plant. https://en.wikipedia.org/wiki/Turbine -------------------------------------------------- Note added at 1 hr (2020-03-08 21:28:57 GMT) -------------------------------------------------- ccccccccccccccc The turbine produces only an enthalpy drop of 156.25 × 2 = 312.5 kJ/kg. If the blade velocity, U, is increased from 250 m/s to 325 m/s and the same enthalpy rise in the compressor is maintained, then the turbine will produce an enthalpy drop of 528.125 kJ/kg, which is in excess of that needed by the compressor. https://www.sciencedirect.com/topics/engineering/stagnation-... |
| |
Login to enter a peer comment (or grade) |
to use [to convert] heat drop Explanation: https://ru.wikipedia.org/wiki/Реактивная_турбина Реактивная турбина — турбина, ротор которой использует силу реакции потока, возникающую при расширении рабочего тела (напор жидкости, теплоперепад газа или пара) в каналах, образованных лопатками ротора ... https://www.sciencedirect.com/topics/engineering/types-of-st... Power generation is dependent on the steam flow required to meet process requirements, and the pressure drop over the turbine. The running cost for electrical generation is therefore the marginally additional cost of generating steam at higher pressure and temperature than would be required for process usage only, plus the fuel equivalent of the heat drop across the turbine. -------------------------------------------------- Note added at 19 hrs (2020-03-09 15:51:00 GMT) -------------------------------------------------- Дима, думаю, что нет. |
| ||
Grading comment
| |||
Notes to answerer
| |||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.