zac.
English translation: tightening torque
| GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
|---|---|---|---|---|---|---|
|
| 15:14 Apr 8, 2018 |
| Polish to English translations [PRO] Tech/Engineering - Aerospace / Aviation / Space / airplanes | |||||||
|---|---|---|---|---|---|---|---|
|
| ||||||
|  Selected response from: Frank Szmulowicz, Ph. D. United States Local time: 01:30 | ||||||
Grading comment
| |||||||
| Summary of answers provided | ||||
|---|---|---|---|---|
| 3 | tightening torque |
|
| Discussion entries: 1 | |
|---|---|
Answers
35 mins confidence: 
tightening torque Explanation: klucz dynamometryczny = torque wrench Tightening torque results in clamping force. ccccc A very common method for checking the tightening torque is to use a click wrench, which is a torque wrench equipped with a clutch that can be pre-adjusted to a specific torque. If the torque is greater than the preset torque value the clutch will release with a click. https://www.atlascopco.com/content/dam/atlas-copco/industria... -------------------------------------------------- Note added at 38 mins (2018-04-08 15:52:39 GMT) -------------------------------------------------- cccccccccc (here in foot-pounds, not kilogram force-centimeters) Tightening Torque Guide for Grade 5 & 8 Hex Cap Screws These Figures represent an estimate of torque (torque being the measurement of friction, not tension) required to induce given preload (clamp load) in a bolt for non-critical applications only. For critical or special applications where greater control is desired this should be experimentally determined. This applies to washer faced or double chamfered hex nuts (or bolts, if bolt is torqued) having a width across flats of approximately 1.5 times the nominal diameter and having threads free of interference. http://www.almabolt.com/pages/catalog/bolts/tighteningtorque... -------------------------------------------------- Note added at 51 mins (2018-04-08 16:06:01 GMT) -------------------------------------------------- ccccccccccccccccccc Zac. jest skrótem od zacisku, czyli clamping, ale clamping load jest siłą, a kG-cm jest momentem obrotowym, czyli tightening torque. ccccccccccccccccccccccccccccccccccccccccccc |
| |
| Login to enter a peer comment (or grade) | ||
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.
KudoZ™ translation help
The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.
See also:
Search millions of term translations