GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
07:27 Feb 13, 2014 |
French to English translations [PRO] Tech/Engineering - Mechanics / Mech Engineering | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Tony M France Local time: 11:15 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
5 | sulifinized |
| ||
3 +1 | sulfinuz treated |
| ||
2 | low sulphur pearlitic iron |
|
low sulphur pearlitic iron Explanation: I think low sulphur content, but far from certain. If it was high then they would surely give a figure for the sulphur content. Await further answers!! Reference: http://www.rsmetali.hr/en/nodular-graphite-cast-iron |
| |
Login to enter a peer comment (or grade) |
sulifinized Explanation: Components, such as cutting tools and roller races, where both hardness and wear resistance are required, can be made from steels that will not soften during subsequent Sulfinuz treatment at 570°C. Such parts are first hardened in the normal manner, then ground to size, and finally Sulfinuz treated ..., Sulfinuz treated, cast-iron diesel engine liners and piston rings were fitted to an omnibus. In general sulfinuz treatment is used for imparting wear resistance to parts. |
| ||
Notes to answerer
| |||
Login to enter a peer comment (or grade) |
sulfinuzé sulfinuz treated Explanation: See this entry from GTD: http://gdt.oqlf.gouv.qc.ca/ficheOqlf.aspx?Id_Fiche=17062014 Apparently, it is a heat treatment process named sulfinuz; it looks as though it was the spelling error with -s- that has been confusing things! -------------------------------------------------- Note added at 1 heure (2014-02-13 08:46:42 GMT) -------------------------------------------------- Gets a respectable 1,790 Ghits. Here's one that merits further investigation: Ferritic nitrocarburizing - Wikipedia, the free encyclopedia en.wikipedia.org/wiki/Ferritic_nitrocarburizing They called their process a "Sulfinuz" treatment because it had sulfur in the salt bath. While the process was very successful with high-speed spindles and ... |
| ||
Notes to answerer
| |||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.