swing follower
Dutch translation: nokvolger
| GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
|---|---|---|---|---|---|---|
|
| 13:23 Jul 4, 2019 |
| English to Dutch translations [PRO] Tech/Engineering - Engineering (general) | |||||||
|---|---|---|---|---|---|---|---|
|
| ||||||
|  Selected response from: Barend van Zadelhoff Netherlands Local time: 23:00 | ||||||
Grading comment
| |||||||
| Summary of answers provided | ||||
|---|---|---|---|---|
| 3 +1 | nokvolger |
|
| Summary of reference entries provided | |||
|---|---|---|---|
| Some references |
|
Answers
2 days 2 hrs confidence: 
peer agreement (net): +1
peer agreement (net): +1nokvolger Explanation: of klepstoter, nokstoter swing follower = cam follower Internal combustion engine with variable swept volume and/or variable compression ratio with a swing follower between the crankshaft and the connecting rod and method for performing such variations The engine has a cylinder (10) in which a piston (14) slides between a top dead center and a bottom dead center under an action of a connecting rod (20). A crankshaft (38) controls displacement of the piston under an effect of a cam follower (26) to vary a swept volume and a compression ratio of the engine. The cam follower is pivotingly mounted around an articulation axle (46) and displaced in translation along a direction. The cam follower is connected to the connecting rod and to the crankshaft respectively by two ends (24, 28) of the follower. An independent claim is also included for a method for varying a swept volume and a compression ratio. cam follower:= klepstoter, nokstoter, nokvolger, sleephefboom http://www.dutchcadillac.nl/cc.html Doordat de nokkenas tegenwoordig meestal boven in de cilinderkop is geplaatst (bovenliggende nokkenas), kan de klep directer worden aangedreven. Dit kan indirect via een tuimelaar of meer direct, als de nokkenas direct boven de klep is geplaatst. Dit gebeurt altijd via een nokvolger om de horizontale component van de draaiende nokbeweging op te nemen. Hoe directer de klep kan worden aangedreven, hoe meer vermogen er kan worden behaald. Als de nokkenas dicht bij de krukas is geplaatst, moet de beweging via nokvolgers en een stoterstang worden overgebracht op de kleppen (onder andere Harley-Davidson en Moto Guzzi). https://nl.wikipedia.org/wiki/Nokkenas -------------------------------------------------- Note added at 2 days 2 hrs (2019-07-06 16:03:00 GMT) -------------------------------------------------- 'swing' is used in view of: - cam follower to vary a swept volume and a compression ratio of the engine - variable swept volume and/or variable compression ratio with a swing follower this follower 'varies/swings' swept volume and/or compression ratio |
| |
Grading comment
| ||
| Login to enter a peer comment (or grade) | ||
Reference comments
2 days 3 hrs peer agreement (net): +1 |
| Reference: Some references Reference information: A cam follower is an assembly connected to the pushrod in the cylinder that converts the rotary motion of the cam into linear motion and can be either a 'swinging-arm-follower' or a 'translating-arm-follower' type. It comprises a pin, roller and bushing. See illustration on p 3-49: https://books.google.co.uk/books?id=W4RFYts7vb4C&pg=RA1-SA3-... 'Swinging arm follower' refers to the shape of the cam follower: http://mechdesigner.support/R12/index.htm?cam-design-arrange... See illustration 24-5: Swing arm follower roller: https://books.google.co.uk/books?id=s5_OCwAAQBAJ&pg=PA687&lp... https://www.manualslib.com/manual/1103102/Perkins-1103.html?... Each cam follower operates in a bore in the cylinder head to keep the follower rollers in line with the cam: https://books.google.co.uk/books?id=W4RFYts7vb4C&pg=RA1-SA3-... 'Cam follower' is a generic term for the various elements that are moved directly by the cam lobe. They follow the cam lift and transmit the motion to the downstream valve components. Cam followers include tappets, buckets, and levers in a wide range of designs. https://www.mahle.com/en/products-and-services/commercial-ve... Also: Tappet, lifter and follower may all mean the same thing depending on which OEM is using the term. These terms describe components that are usually positioned to directly ride, or at least be actuated by a cam profile. https://books.google.co.uk/books?id=iJ6P4Q6UCPIC&pg=PA88&lpg... cam follower>nokvolger https://corporate.haynes.co.uk/sites/default/files/english-d... cam follower>sleephefboom van klepmechanisme, nokvolger, nokstoter, nokvolger http://www.transnate.be/dictionary/display.php?action=search... cam follower>nokstoter, nokvolger, sleephefboom https://www.365autotaal.nl/c-e-n/ cam follower>nokstoter UnilexPro cam follower>nokrol Kluwer GPWB [see: https://www.proz.com/kudoz/english-to-dutch/automotive-cars-...] cam follower>geleidennok, nokstang, nokstoter Woordenboek werktuigbouwkunde |
| |
| Login to enter a peer comment (or grade) | ||
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.
KudoZ™ translation help
The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.
See also:
Search millions of term translations