lean welders

14:26 May 18, 2011 

Meirs, ai si tu dreptate cu bajbaitul. Poate are dreptate si Lee cu ultimul lui comentariu.
Apropo de curatirea aparatului de sudura (nici eu nu stiam prea mult) iti dau o referinta:
How to Clean a MIG Welder

1.
Inspect the nozzle first to see if there is weld accumulated on the nozzle. If so, you need to use a wire brush to scrape this off. Next check the wire and sensor, which can become welded to the tip.
2
Remove the gas shield. Look carefully at the weld bead on the end of the wire and see if it is attached to the tip. Pull the trigger and see if the wire comes through the tip. If it doesn't, it needs to be cleared.
3
Use a pair of wire cutters to cut the welded portion. Realign the wire and pull the trigger again, looking to see if it comes through the tip. If it does, you have cleared the problem. If not, try taking a little more off and test again.
4
Turn your attention to the gas shield nozzle. If there are bits of weld spatter inside, clean it out with a small wire brush until the bits of spatter are gone. Use a larger wire brush to clean the inside walls of the nozzle. The cleaner the surface the better

13:01 May 18, 2011 

Poate - ST este destul de obscur - putem sa bâjbâim până mâine pe aşa întuneric. Asker să decidă ce este cel mai verosimil.

12:09 May 18, 2011 

... poate fi și sensul ”așejați/rezemați aparatul de sudură și evitați orice fel de lovituri”

10:38 May 18, 2011 

Nu curăţaţi sudurilie - că nu pre ătiu de e de curăţat la aparate - dar la suduri electrice se curăţă depozitul de zgură - cu un ciocan în general

09:36 May 18, 2011 

Lee, ai dreptate, nu am fost atent la inceputul frazei. Corect ar fi" nu curatati aparatele de sudura". Si eu m-am gandit la inceput sa dau o explicatie de ce in acest context nu merge interpretarea de "lean" in intelesul pe care l-ai dat in comentariul de mai sus.
Iti multumesc pentru observatie.

08:05 May 18, 2011 

Can you please "fit" your "clean welders" explanation within all the other "don'ts" in the context ?

22:07 May 17, 2011 

“Lean” is simply a manufacturing concept designed to provide the optimum framework for efficient, competitive production. The lean production system is a management philosophy that embraces all aspects of industrial operations by focusing on the reduction of waste from the value stream in order to remain competitive in a world- driven economy.
....with lean welding becoming an emphasis in 2003 when the company committed to using a single process (solid wire pulsed gas metal arc welding, or pulsed MIG) for all of its production welding.
Deși contextul indică un typo, mă gândesc că s-ar putea să fie vorba de un aparat de sudură eficient. --- doar o părere

14:29 May 17, 2011 

sounds as the right text (similar to "blows" that must be avoided - a nu se curăţa sudurile"

14:27 May 17, 2011 

Ca are rezematul sudorilor cu toată povestea asta ?