GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
02:46 Aug 18, 2006 |
Japanese to English translations [PRO] Tech/Engineering - Engineering (general) | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: KathyT Australia Local time: 17:49 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
1 | datum hole |
|
Discussion entries: 5 | |
---|---|
datum hole Explanation: Don't be embarrassed!! I usually see this as "guide (hole)" but there seem to be several names.... A Google search confirms it's not that common... datum 基準点 | 既知数 | 事項 | 資料 | 統計 datum 基準面 | 基準 datum データ | データム | 基準 | 測地原点 | 与件 Datum 基準線 datum データム | データ項目 | 基準 | 基準線 | 基準面 | 資料 | 測地基準線 | 測地系 | 測地原点 | 与件 datum A 基準A datum pin 基準ピン datum line 水準線 | 基準線 | 基本水準線 datum line データムライン | データム線 | 基準のレベル | 基準線 | 基準面 | 基本水準線 | 基本水準面 | 水準線 datum line 基準線 Drafting Standards & GD&T - Do I double the result? The datum hole is located exactly in its correct position, by definition. The second hole is located with respect to the datum hole. The 0.1 value is a diameter around the nominal position of the second hole. ... www.eng-tips.com/viewthread.cfm?qid=130692&page=10 - 28k - Cached - Similar pages [PDF] 8 mm Wide Magnetic Tape Cartridge for Information Interchange ... File Format: PDF/Adobe Acrobat - View as HTML Plane Y is perpendicular to Plane X and Plane Z and passes through the centre of Datum Hole A. ... The centre of the circular datum hole A shall be at the intersection of planes X and Y (see figure 10). ... www.ecma-international.org/publications/files/ECMA-ST/Ecma-... - Similar pages NC ROTARY TABLE KITAGAWA MRM Datum-Hole Diameter dia.(mm), dia.32, dia.40, dia.45. Gear ratio, 1/60, 1/72, 1/90. Clamping Torque(N·m) (Pneumatic 0.5MPa), 150, 310, 350. Max. Work Piece Inertia kgm2(kgf.cm.sec2), 0.22/2.2, 0.51/5.2, 1.00/10.2 ... kiw.co.jp/wpage/mtools/nct_mr_e.html - 23k - Cached - Similar pages [PDF] 12.65-mm Type D-11 Format File Format: PDF/Adobe Acrobat - View as HTML Datum plane X shall be orthogonal to datum plane Z and shall include the centers of datum holes (a) and. (b). Datum plane Y shall be orthogonal to both datum plane X and datum plane Z and shall include the. center of datum hole (a) as ... bssc.sel.sony.com/BroadcastandBusiness/minisites/cinealta/docs/S368M.pdf - Similar pages Reference: http://trans.glova.jp |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.